This guide will show you how simple and effective it is to add a camera to your SpotAI appliance using auto-discovery and quick activation. If you have cameras connected to an NVR that you need to add, check out this article.
In order to use Ubiquiti IP Cameras, you will first need to make sure you are running the latest firmware on the camera and then enable the "Standalone mode" on this unit.
1. Connect the camera to the network as outlined in the Quick Start Guide (QSG) that came with your camera. QSG's current versions are also downloadable in the Downloads page, within each product's Documentation section.
2. Update the camera's firmware to the newest available (also found on the Downloads page).
3. Log in to the camera.
a. On a new install, the wizard will appear. Select Standalone mode.
b. If this camera is already in use, go to the Configure tab and ensure it is set to Standalone mode and click Save.
> Once you have saved the Standalone configuration settings simply head back to the Spot Dashboard and type " /s0 " where the Path field is located and click authenticate.
We hope this article was useful to you, please leave us a comment or feedback as it will help us improve our customer support center.